K'MX 632 DUO
Description :
The successor to the well-known K’MX series with turrets is designed for machining parts from Ø 3-32mm. The MANURHIN K’MX 632 DUO with two separately programmable linear slides enable simultaneous turning or milling with two tools.
Options such as “driven tools”, “discharge of long parts” or “C-axis” round off the flexibility of this series. A clear arrangement of the axes, ease of use and simple, fast programming allow use for small, medium and large series. Two electro-spindles, up to 10 turning/drilling tools or driven tools also enable the machining of complex workpieces.
Up to a maximum of 8 tool positions can be occupied with the Capto C3 system including internal cooling / high pressure.
Advantages :
- Max. bar capacity Ø 32 or Ø 36 mm
- Power of the driven tools 2.3 kW
- Torque of the driven tools 32 Nm
Technical specifications
| Technical specifications | K'MX 626 | K'MX 632 | |
|---|---|---|---|
| Number of linear axes | 6 | 6 | |
| main spindle | Max. bar capacity | Ø 26 mm | Ø 32 mm |
| spindle bore | Ø 37 mm | Ø 37 mm | |
| Spindle power (100/40%) | 5.5 / 7.5 kW | 5.5 / 7.5 kW | |
| Max RPM | 8.000 U/min | 8.000 U/min | |
| headstock stroke | 410 mm | 365 mm | |
| pickup spindle | Max. bar capacity | Ø 26 mm | Ø 32 mm |
| Max RPM | 8.000 U/min | 8.000 U/min | |
| Spindle power (100/40%) | 3,7/5,5 kW | 3,7/5,5 kW | |
| Max RPM | 8.000 U/min | 8.000 U/min | |
| clamping depth | 150 mm | 150 mm | |
| Max. part length with workpiece remover | 200 mm | 200 mm | |
| tool carrier | number of sleds | 1 | 1 |
| commute (X) | 80 mm | 80 mm | |
| commute (Y) | 191 mm | 191 mm | |
| tool stations | 2 x 5 | 2 x 5 | |
| Cross section turning tools | 16 x 16 mm | 16 x 16 mm | |
| coolant supply | Coolant tank capacity | 300 l | 300 l |
| flow rate | 50 l/min | 50 l/min | |
| Druck | 9 bar | 9 bar | |
| Dimensions of the machine | length | 3.000 mm | 3.000 mm |
| (Excluding loader and chip conveyor) | broad | 1.400 mm | 1.400 mm |
| height | 2.200 mm | 2.200 mm | |
| Weight | .... kg | .... kg |
Numerical control FANUC
Options : C-axis on main and counter spindle / CO2 extinguishing system / Oil mist extraction / Powered tools / Chip conveyor / High-pressure system / Pneumatic guide bush system / Removal of long parts through the sub-spindle
